evolved from KVgear
Cart 0
evolved from KVgear
Cart 0
KVgear SubPiggy stand for Moog synths
SubPiggy for Moog
Roland RC-505 looper and Moog MF-104M on KVgear SubPiggy stand
KVgear SubPiggy stand mounted to a Moog Sub37 synth
SubPiggy for Moog
Strymon BigSky pedal and Arturia Keystep on KVgear SubPiggy stand
Korg Volcas and Arturia Keystep on KVgear SubPiggy stand
KVgear SubPiggy stand allows room for all cables on Moog Sub37 synth.
KVgear SubPiggy stand on Sub25 in the Moog Store in Asheville
KVgear SubPiggy stand provides plenty of room for tweaking
KVgear SubPiggy stand and the gorgeous Moog Subsequent 37 with end cheeks removed
Two moogerfooger pedals on KVgear SubPiggy stand
Two effects pedals held above Moog Subsequent 37 by a KVgear SubPiggy stand
The KVgear SubPiggy stand nestles artistically into the back of a Moog Sub37 synth
SubPiggy for Moog
SubPiggy for Moog
KVgear SubPiggy stand holding Behringer TD-3 and monome controller on a Sub37 synth
KVgear SubPiggy stand holding Behringer TD-3 and monome controller on a Sub37 synth -- front view
KVgear SubPiggy stand holds effects pedal and System-1 above Moog Sub37.
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand -- front view
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand -- side view
Keystep Pro and Eventide H9 pedal held above Moog Sub37 by KVgear SubPiggy stand
KVgear SubPiggy stand fits Moog little phatty and can hold an SP-404 and Beatstep.
KVgear SubPiggy stand fits Moog Sub 37 and can hold a Behringer modular case.
KVgear SubPiggy stand fits Moog Sub 37 and can hold a Roland System-500 Eurorack system plus a strymon pedal.
Elektron Digitone and Heat on stand connected to Moog Sub37
Two Elektrons installed on KVgear SubPiggy stand which is mounted to a Moog Sub37
SubPiggy stand mounted to Moog Sub Phatty synth with fx pedals above.

SubPiggy for Moog

$138.00 $0.00
Shipping calculated at checkout.

NOTE:  The SubPiggy for 25 key Moog synths has been temporarily discontinued.  Production of the 25 key size will resume in mid December.

It's a piggyback stand for Moog Sub, Subsequent and Phatty synths! This unique stand holds gear above the control panel while leaving room to rest your fingers on the  upper edge as you tweak knobs. Gear support arms can be easily repositioned and locked in place. This stand can make performing and playing easier by placing fx pedals, a controller keyboard, desktop synth, looper, drum machine, laptop or tablet within easy reach of the synth control panel.

Use the pull-down menus above to specify the type of gear support arms (angled or flat) you want.

If you like the idea of the SubPiggy but don't want to attach directly to your synth, take a look at our Gear Rail. It's the freestanding cousin to the SubPiggy. The Gear Rail fits great with Moog Sub synths.

Features:

  • Attaches directly to existing fastener holes in the synth.
  • Felt washers protect the end cheeks on the synth.
  • Fits Sub, Sub Phatty, Little Phatty using our included screws which have the same thread type as used by Moog.
  • Fits Subsequent 37 CV and Subsequent 37 if a special fastener set is purchased (see below)
  • Contact Us if you will attach this to a Sub Phatty. We'll include a special set of mounting screws specifically for the Sub Phatty
  • End panels can be easily removed and reinstalled for touring.
  • Maximum total weight of gear on SubPiggy to be 6.8 kg (15 lb).
  • Gear support arms are 6.75" deep and are available angled or flat (horizontal)
  • Thick rubber trim prevents gear from sliding around on the arms.
  • Decksaver CANNOT fit over the base Moog Sub synth. We offered an adapter kit in the past, but because of changes to the Decksavers product the SubPiggy is no longer compatible. 
  • Decksavers CAN fit on all gear placed on the gear support arms.

Fits on angled or flat arms:

  • Moog Mother-32, DFAM, Subharmonicon
  • Behringer Neutron, Model D, Wasp Deluxe, Cat, K-2, Pro-1
  • Elektron boxes (all models)
  • Hydrasynth desktop
  • RD-8
  • MicroFreak
  • Yamaha Reface (requires HE-2 hook extenders)
  • RC-505, RC-202, TR-8 (original version), MX-1, TB-3, VT-3 (requires HE-2 hook extenders)
  • TR-8S (tendency to tip backwards; only install if there's a wall immediately behind it)

Fits only on flat arms:

  • TR-808, TR-909
  • Maschine, MPC, minikey keyboard, and much more
  • Korg Minilogue
  • Minibrute, Microbrute

Dimensions:

  • Flat Arms: 8.68" (220 mm) table to bottom of gear
  • Angled Arms: 8.25" (210 mm) table to bottom front of gear; 34 degree angle. 12.03" (306 mm) table to upper rear corner of support arm

Optional Accessories:


Includes:

  • (2) end panels
  • (4) support arms with locking collars (specify angled or flat during ordering)
  • (2) rigid support tubes
  • (4) steel/plastic knobs
  • (4) felt washers
  • (4) mounting screws


CAUTION: Do not lift your synth using the SubPiggy stand. Doing so will cause the stand to break and your precious Moog will drop to the ground. Do not transport your synth with gear on the SubPiggy stand.