The original black wedge synth stand
Cart 0
The original black wedge synth stand
Cart 0
KVgear SubPiggy stand for Moog synths
SubPiggy Mk2 PRO (for Moog)
Roland RC-505 looper and Moog MF-104M on KVgear SubPiggy stand
KVgear SubPiggy stand mounted to a Moog Sub37 synth
SubPiggy Mk2 PRO (for Moog)
Strymon BigSky pedal and Arturia Keystep on KVgear SubPiggy stand
Korg Volcas and Arturia Keystep on KVgear SubPiggy stand
KVgear SubPiggy stand allows room for all cables on Moog Sub37 synth.
KVgear SubPiggy stand on Sub25 in the Moog Store in Asheville
KVgear SubPiggy stand provides plenty of room for tweaking
KVgear SubPiggy stand and the gorgeous Moog Subsequent 37 with end cheeks removed
Two moogerfooger pedals on KVgear SubPiggy stand
Two effects pedals held above Moog Subsequent 37 by a KVgear SubPiggy stand
The KVgear SubPiggy stand nestles artistically into the back of a Moog Sub37 synth
SubPiggy Mk2 PRO (for Moog)
SubPiggy Mk2 PRO (for Moog)
KVgear SubPiggy stand holding Behringer TD-3 and monome controller on a Sub37 synth
KVgear SubPiggy stand holding Behringer TD-3 and monome controller on a Sub37 synth -- front view
KVgear SubPiggy stand holds effects pedal and System-1 above Moog Sub37.
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand -- front view
Two Elektrons (Analog Four MkII and Analog Rytm MkII) held above Moog Sub37 by KVgear SubPiggy stand -- side view
Keystep Pro and Eventide H9 pedal held above Moog Sub37 by KVgear SubPiggy stand
KVgear SubPiggy stand fits Moog little phatty and can hold an SP-404 and Beatstep.
KVgear SubPiggy stand fits Moog Sub 37 and can hold a Behringer modular case.
KVgear SubPiggy stand fits Moog Sub 37 and can hold a Roland System-500 Eurorack system plus a strymon pedal.
Elektron Digitone and Heat on stand connected to Moog Sub37
Two Elektrons installed on KVgear SubPiggy stand which is mounted to a Moog Sub37
SubPiggy stand mounted to Moog Sub Phatty synth with fx pedals above.

SubPiggy Mk2 PRO (for Moog)

$248.00 $0.00
Shipping calculated at checkout.

PRE-ORDERS ARE NOW BEING TAKEN.  Production units will ship in January 2027.

All-new Gear Rail Mk2 and SubPiggy Mk2 are available for pre-order and will begin shipping in January 2027! Completely redesigned for adjustability, expandability, and greater load capacity.  We are very excited to bring this major upgrade to fruition.  For a product launch announcement, keep an eye on our Instagram account or message us on our contact form.

NOTE:  This page is under construction.  Images shown here are for the OG version.  New photos will be uploaded soon.

It's a piggyback stand for Moog Sub, Subsequent and Phatty synths! This unique stand holds gear above the control panel while leaving room to rest your fingers on the  upper edge as you tweak knobs. Gear support arms can be easily repositioned and locked in place. This stand can make performing and playing easier by placing fx pedals, a controller keyboard, desktop synth, looper, drum machine, laptop or tablet within easy reach of the synth control panel.

If you like the idea of the SubPiggy but don't want to attach directly to your synth, take a look at our Gear Rail Mk2. It's the freestanding cousin to the SubPiggy. The Gear Rail fits great with Moog Sub synths.

Features:

  • Adjustable width fits either 37 key or 25 key synths.
  • Hook angles adjustable, including horizontal and reverse angles.
  • Uses our patent-pending Adapt system of modular components.
  • Attaches directly to existing fastener holes in the synth.
  • Felt washers protect the end cheeks on the synth.
  • Fits Sub, Sub Phatty, Little Phatty using our included screws which have the same thread type as used by Moog.
  • Fits Subsequent 37 CV and Subsequent 37 if a special fastener set is purchased (see below)
  • Contact Us if you will attach this to a Sub Phatty. We'll include a special set of mounting screws specifically for the Sub Phatty
  • Sturdy aluminum end panels can be easily removed and reinstalled for touring.
  • Maximum total weight of gear on SubPiggy to be 6.8 kg (15 lb).
  • Thick rubber trim prevents gear from sliding around on the arms.
  • Decksaver CAN fit over the base Moog Sub synth if you purchase our optional spacer kit. 
  • Decksavers CAN fit on all gear placed on the gear support arms.

Fits on arms:

  • Moog Mother-32, DFAM, Subharmonicon
  • Behringer Neutron, Model D, Wasp Deluxe, Cat, K-2, Pro-1
  • Elektron boxes (all models)
  • Hydrasynth desktop
  • RD-8
  • MicroFreak
  • Yamaha Reface (requires HE-2 hook extenders)
  • RC-505, RC-202, TR-8 (original version), MX-1, TB-3, VT-3 (requires HE-2 hook extenders)
  • TR-8S (tendency to tip backwards; only install if there's a wall immediately behind it)

Fits on arms if additional set of Adapt Hooks are purchased for the purpose of extending the depth of the arm:

  • TR-808, TR-909
  • Maschine, MPC, minikey keyboard, and much more
  • Korg Minilogue
  • Minibrute, Microbrute

Dimensions:

  • 20" to 37.5" adjustable width

Optional Accessories:


Includes:

  • (2) end panels
  • (4) support arms with locking collars 
  • (2) telescoping tubes
  • (4) steel/plastic knobs
  • (4) felt washers
  • (4) mounting screws


CAUTION: Do not lift your synth using the SubPiggy stand. Doing so will damage the stand and could cause your precious Moog to drop to the ground. Do not transport your synth with gear on the SubPiggy stand.